I just found 3 comments in Spam from a newer subscriber. The comments are fine, but I am unable to approve or release these comments from Spam. When you get a chance, you’ll see them. Thanks!
I hope today is treating you kinder than days have been, Scottie!
Personal note: I got sick and very depressed. Was only out of bed for 4 to 6 hours only. So much bad happened in a short period of time that I couldn’t deal. I plan to do a video someday on it. But everything from being on the gurney with iv’s in my hand only to learn they couldn’t do my cataract surgery to the car engine seizing and then the van needing 2 grand in repairs. That was enough but Ron did not measure the placement of the bathroom project water lines, so things did not fit. It all had to be redone and so we changed where things were going. But just as I started to feel better and had more energy I went to fix a problem on my computers. I reset the video one thinking I had the extended updates for a year. But resetting it wiped that out. So for the last few days I have learned about Linux systems and tried to install them. The first one Ubuntu installed but I couldn’t get the line commands to work. The second installed and worked but faulted out. Every attempt to install one since has failed. I am wiping and then reactivating the hard drive to see if that will work. If not I will have to add a new processing chip and or motherboard to the list of things I can’t afford but need. That is why I have not been around much. Best wishes to all and hugs to those that want them.
Bee explains it all here:
This will be up early on Nov. 2nd, which puts us a day behind though I’m doing this on Nov. 1st. Anyway, today I choose “I Declare World Peace,” lyrics by Lawrence R. Gelber, performed by Win Thompkins. Enjoy an obscure bit of music, and be sure to click through to Bee’s to see her peace music, too, and share your own peace music!
unless someone’s able to override an override of an override. I’m not familiar with this publication; this was another story I read during a jog, but the story seems feasible. Experts here will know. I’m just tossing it in here.
News By Jowi Morales published 15 hours ago
The smart vacuum cleaner was remotely bricked for not collecting data.
An engineer got curious about how his iLife A11 smart vacuum worked and monitored the network traffic coming from the device. That’s when he noticed it was constantly sending logs and telemetry data to the manufacturer — something he hadn’t consented to. The user, Harishankar, decided to block the telemetry servers’ IP addresses on his network, while keeping the firmware and OTA servers open. While his smart gadget worked for a while, it just refused to turn on soon after. After a lengthy investigation, he discovered that a remote kill command had been issued to his device.
He sent it to the service center multiple times, wherein the technicians would turn it on and see nothing wrong with the vacuum. When they returned it to him, it would work for a few days and then fail to boot again. After several rounds of back-and-forth, the service center probably got tired and just stopped accepting it, saying it was out of warranty. Because of this, he decided to disassemble the thing to determine what killed it and to see if he could get it working again.
Since the A11 was a smart device, it had an AllWinner A33 SoC with a TinaLinux operating system, plus a GD32F103 microcontroller to manage its plethora of sensors, including Lidar, gyroscopes, and encoders. He created PCB connectors and wrote Python scripts to control them with a computer, presumably to test each piece individually and identify what went wrong. From there, he built a Raspberry Pi joystick to manually drive the vacuum, proving that there was nothing wrong with the hardware.
From this, he looked at its software and operating system, and that’s where he discovered the dark truth: his smart vacuum was a security nightmare and a black hole for his personal data. First of all, it’s Android Debug Bridge, which gives him full root access to the vacuum, wasn’t protected by any kind of password or encryption. The manufacturer added a makeshift security protocol by omitting a crucial file, which caused it to disconnect soon after booting, but Harishankar easily bypassed it. He then discovered that it used Google Cartographer to build a live 3D map of his home.
This isn’t unusual, by far. After all, it’s a smart vacuum, and it needs that data to navigate around his home. However, the concerning thing is that it was sending off all this data to the manufacturer’s server. It makes sense for the device to send this data to the manufacturer, as its onboard SoC is nowhere near powerful enough to process all that data. However, it seems that iLife did not clear this with its customers. Furthermore, the engineer made one disturbing discovery — deep in the logs of his non-functioning smart vacuum, he found a command with a timestamp that matched exactly the time the gadget stopped working. This was clearly a kill command, and after he reversed it and rebooted the appliance, it roared back to life.
So, why did the A11 work at the service center but refuse to run in his home? The technicians would reset the firmware on the smart vacuum, thus removing the kill code, and then connect it to an open network, making it run normally. But once it connected again to the network that had its telemetry servers blocked, it was bricked remotely because it couldn’t communicate with the manufacturer’s servers. Since he blocked the appliance’s data collection capabilities, its maker decided to just kill it altogether. “Someone—or something—had remotely issued a kill command,” says Harishankar. “Whether it was intentional punishment or automated enforcement of ‘compliance,’ the result was the same: a consumer device had turned on its owner.”
Unfortunately, many other smart vacuum brands use similar hardware, so it’s not far-fetched to think that they have the same setup. This is likely especially true for cheaper devices that have less capable hardware and aren’t capable of edge computing, meaning they’ll have to send the data to some faraway server for processing. But because your information is being offboarded to another device outside of your control, you really have no idea what’s happening to it, giving the manufacturer free rein to use it as it pleases.
In the end, the owner was able to run his vacuum fully locally without manufacturer control after all the tweaks he made. This helped him retake control of his data and make use of his $300 software-bricked smart device on his own terms. As for the rest of us who don’t have the technical knowledge and time to follow his accomplishments, his advice is to “Never use your primary WiFi network for IoT devices” and to “Treat them as strangers in your home.” (snip)
I didn’t even know these clocks existed until I read about them on the phone during a jog. All in all, this seems like a very first world problem complete with hysterics, considering all that is going on around us, but these clocks might frighten a person of faith. (So do they understand what faith literally means?)
The popular sunrise alarm clock company stirs up controversy with its horror-themed Halloween ads and programming.
Few sunrise alarm clocks have reached the level of popularity set by Hatch, the combination light and sound machine designed to help support natural circadian rhythms. Which is why I was surprised to notice it trending on TikTok, not for its gentle sunrise light feature or recently released Hatch+ programming—but for being a symbol of the occult.
The problem began, innocently enough, with an anti blue light promotional campaign, released by Hatch on October 13 and titled “Goodnight, Phone.” It consists of a one-minute, 30-second Hollywood-esque trailer starring actress Kiernan Shipka, who delivers a convincing scream-queen performance with the theme that blue light exposure after your bedtime can lead to nightmarish sleep. The trailer is, admittedly, a bit PG-13—Shipka pulls a long, bloody phone cord out of her mouth, and is attacked by a zombie version of herself in bed.
With a Hatch device and a subscription to Hatch+, users are able to change their alarm sounds, from white noise and ocean waves to the “hoa hoa hoa” introduction from the vampire classic Twilight, and Hatch+ is also promoting its library of Halloween-themed bedtime stories, like a narration of “The Legend of Sleepy Hollow.”
For some, the creepy trailer and vampire-themed Hatch+ programming were a bridge too far, and by October 24, according to Hatch, the brand found itself trending on “DemonTok,” the TikTok hashtag for discussions of monsters, demons, and related subjects.
As “Hatch demonic ad” and “Is the Hatch alarm clock demonic?” quickly became top search terms, several users posted videos of themselves throwing their devices into the trash in protest, including TikTok Christian influencer Charity, who goes by the username “CharityIsMe.” (snip-there is MORE)
or just wish to know a little more! See history and more on this home page; beneath are some snippets.
Here in the USA, we mourn our loved ones when they pass with funeral services and wearing dark solemn clothing. It’s usually a sad time in our families when we have to say goodbye to grandpa forever. Different cultures grieve and treat death differently with traditions that have been around for centuries.
One culture that has created a unique and interesting way to face death and the deceased is Mexico. Mexico is colorful, noisy, and lots of fun. The people, the food, and the celebrations are bright, loud, and unequaled. So when it comes to death, in true Mexican style, Mexicans celebrate with color, food, and music.
Day of the Dead is a 2-day celebration where it is believed that the passageway between the real world and the spirit world is open so our deceased loved ones can come back to visit us. What do we do when grandpa comes back from the land of the dead? We make his favorite meal and we offer him his favorite drink. We sing, dance, and rejoice before he heads back to the underworld for another year.
Day of the Dead is celebrated on November 1st and 2nd. It is sometimes confused with Halloween because of the symbolic skulls but is not related at all.
It is said that on November 1st the children who have passed come back to visit and celebrate as angelitos and on the following day, November 2nd, it’s the adults (Difuntos) turn to show up for the festivities.
Family members prepare for several weeks in advance for the tradition by creating altars, decorating burial sites, and cooking specific Day of the Dead food. (snip-MORE)
=====
In the weeks leading up to the holiday, Mexican families will begin to decorate their homes for the holiday. The centerpiece will be the Ofrenda, or Altar de Muertos, a display meant to commemorate the lives of loved ones. This tradition can be traced back to the Aztecs, who would place offerings for the dead, including food and flowers, on tree stumps on their days of remembrance.
The traditional Ofrenda is divided into various levels to represent the various stages of life and death. There can be two levels, representing heaven and Earth, three levels, representing heaven, Earth, and the underworld, or seven levels, representing the seven stages souls have to cross to reach eternal rest. It is decorated with purple and orange, the traditional colors of the holiday, and often adorned with papel picado, a popular Mexican paper craft that is made up of ornate cut-outs. The papel picado used for the holiday will feature specific images and motifs associated with Day of the Dead, such as sugar skulls and dancing skeletons. Traditional Mexican oilcloths are commonly used to drape the surface of the Ofrenda. (snip-MORE)
Skull imagery has a long history dating back to the traditions of pre-Columbian civilizations. The Aztecs had several festivals of remembrance where they would worship the Goddess Mictecacihuatl, ruler of the afterlife and keeper of the dead. Mictecacihuatl was often represented as a skeleton, adorned with a crown of flowers and skulls. For many pre-Columbian cultures, human skulls or skull motifs were used as decoration on walls as a sacrificial offering to the gods. These are commonly referred to by the Nahuatl term Tzompantli. Some of these, such as the Mayan Chichen Itzá Tzompantli in Yucatán, and the Aztec Huey Tzompantli in Mexico City, remain to this day and can be viewed by visitors.
Another motif that may have influenced calavera imagery as we know it today is likely a type of European art known as Danse Macabre. These paintings and engravings, often featuring dancing skeletons, were meant to represent the inevitability of death and were used as decorations in churches across Europe. It is probable that the Danse Macabre motifs were brought over by Spanish missionaries and later fused with Indigenous skull imagery. (snip-MORE)
being my final post for Halloween 2025. 🎃 🫥
Scottie's Playtime 